Unveiling the Power of Epower-199 Jump Starter: Your FAQs Answered
Introduction:
The Epower-199 Jump Starter by Andeman is not just a device; it's a powerhouse designed to breathe life into 12-volt lead-acid batteries. In this blog post, we'll explore frequently asked questions (FAQs) about the Epower-199, ensuring you harness its potential to the fullest.
How to Use the Override Mode:
Epower-199 ensures a seamless jumpstart experience. If your battery is extremely low, the "START" display might not activate. In such cases, follow these steps:Press the BOOST button for 2 seconds to activate "Override mode."
Warning: Override mode disables safety protection and is solely for use when the battery voltage is too low to be detected.
How to Charge the Epower-199:
Charging the Epower-199 is a breeze, offering versatility in power sources:With Wall Charger:
Plug the wall charger into the universal socket.
Connect the USB-C cable to the device's USB-C port.
With External Power Supply:
Plug the USB-C cable into an external power supply.
With Car Charger (Optional):
Plug the car charger into the device's input port.
How to Turn On Low Current Output Mode:
Enhance versatility by activating the low current output mode:
Plug the car charger into the device's input port.
Double-click the power button to turn on the low current output mode and double-click again to turn it off.
Light Modes for Every Situation:
The Epower-199 comes with various light modes catering to different scenarios:Short Press: Turns on the light.
Long Press (2 Seconds): Activates the light mode.
Short Press to Switch Modes: Choose from low light, highlight, white light flashing, SOS, and rapid red light flashing.
BOOST Button (2 Seconds): Turns on forced ignition, hold for 6 seconds to turn off.
FAQs:
1. Q: How do I turn off Epower-199?A: Press and hold the power button for 6 seconds to turn it off. The device intelligently enters sleep mode with low battery levels.
2. Q: How long does the battery last in storage?
A: The battery holds its charge for around 2 years in storage. Charge it slightly every three months for prolonged battery life.
3. Q: How long to recharge Epower-199 from flat?
A: It takes approximately 1.5 hours for a full recharge using a 65W USB-PD charger.
4. Q: What is the expected lifespan of Epower-199?
A: With proper care, it can last around five years, supporting approximately 500 recharges from 0 to 100%.
5. Q: Can I use Epower-199 to charge my phone or tablet?
A: Absolutely! Epower-199 features standard USB and USB-C output ports, allowing you to charge any mobile device. For fast charging, use a cable that supports it.
